Weilida supplies DTH hammers for water well drilling, mining, quarrying, geothermal drilling and other hard-rock applications. A DTH hammer uses compressed air to drive an internal piston directly behind the drill bit, transferring percussion energy close to the rock face for efficient and stable drilling.
The correct DTH hammer should be selected according to the required hole diameter, compatible bit shank, working air pressure, compressor capacity, drill rig and rock formation. Weilida can support customers in matching the hammer with compatible drill bits, drill pipes and drilling equipment for different project conditions.
If you are looking for a reliable DTH hammer for sale, send us your required hole diameter, hammer size, bit shank, working pressure and drill rig information for product matching and quotation.
Because the hammer operates directly behind the drill bit, percussion energy is delivered close to the bottom of the hole. This helps maintain efficient rock breaking, particularly in hard and competent formations.
The DTH drilling method combines percussion and rotation. The hammer repeatedly impacts the bit while the drill string rotates, allowing the carbide buttons to continuously engage fresh rock.
Compressed air not only powers the hammer but also helps carry drilling cuttings away from the bottom of the hole and toward the surface.
DTH hammers are suitable for applications where rotary drilling alone may become inefficient, including hard rock, fractured formations and deeper boreholes.
Hammer performance depends on correct matching with the drill bit, drill pipe, compressor and drilling rig. Weilida can assist with component matching according to the customer's operating requirements.
Routine inspection and timely replacement of wear parts can help maintain hammer performance and extend service life under repeated drilling operations.
The DTH hammer working principle is based on compressed-air-powered percussion at the bottom of the borehole.
Compressed air is delivered from the compressor through the drill pipe and into the DTH hammer.
Air pressure causes the piston inside the hammer to move rapidly back and forth.
The piston repeatedly impacts the rear of the DTH drill bit, transferring percussion energy directly to the cutting face.
At the same time, the drill string rotates so the carbide buttons on the bit continually contact new areas of rock.
Exhaust air passes through the drill bit and helps flush broken rock particles from the bottom of the hole.
This direct energy transfer is one of the main reasons DTH hammer drilling is widely used for hard-rock and deep-hole applications.
DTH hammers and bits operate as a matched percussion drilling system.
The hammer generates impact energy, while the drill bit transfers this energy into the rock. Using an incompatible bit shank, unsuitable diameter or incorrectly matched air supply can reduce drilling efficiency and may increase component wear.
| Component | Main Function | Key Selection Factor |
| DTH Hammer | Generates percussion energy | Hammer size, pressure and airflow |
| DTH Drill Bit | Breaks the rock | Shank, diameter and button design |
| DTH Drill Pipe | Transfers rotation and compressed air | Diameter, thread and length |
| Air Compressor | Supplies compressed air | Pressure and airflow |
| Drill Rig | Provides rotation, feed and control | Rig capacity and drilling application |
When requesting a quotation, providing information about the complete drilling system helps us recommend a more suitable configuration.
Water Well Drilling: DTH hammers are widely used for water well drilling where the bore must pass through hard, consolidated or fractured rock formations. For complete drilling equipment, explore our water well drill rigs.
Mining Drilling: DTH drilling is suitable for blast holes, production holes and other mining applications requiring efficient penetration through hard rock.
Quarrying: Granite, limestone and aggregate quarries commonly use DTH hammers for production drilling, splitting holes and blast-hole applications.
Geothermal Drilling: DTH hammers can be used for geothermal boreholes where stable rock penetration is required at greater depths.
Construction and Foundation Drilling: The technology is also suitable for selected foundation, anchoring, infrastructure and other rock-drilling projects.
Weilida focuses on drilling equipment and drilling-tool solutions for different underground and rock-drilling applications.
In addition to DTH hammers, Weilida supplies related DTH drill bits, drill pipes and drilling rigs, helping customers source multiple components for a complete drilling system.
Selecting a hammer without considering the bit, compressor and drilling rig can cause compatibility problems.
Our team can review your drilling parameters and help identify a suitable hammer configuration.
Product performance depends on material selection, machining accuracy, heat treatment and manufacturing consistency.
Learn more about our drilling equipment factory and manufacturing capabilities.
English
